36
status. After changed, the status would be kept.
Initial Value is Monostable
Remote Code Check
Length
The remote access code length would be restricted with it. If the input
access code length is matched with it, system would check it
immediately. Initial Value is 4.
The key pattern
Close keyboard input;
Only the Password
；
Only the Dial
；
Dial and Password
；
Local
authentication
code
door
opening
method
Disable: after disable, cannot use the authentication code to open the
door.
Location*Access Code
：
Use the location speed dial + Authentication
code in the setting access rules to open the door.
Access Code Only
：
Just use the identification code to open the door
Default Input Mode
Password: if set to password, enter password by default.
Dial: if set to dial, the default number is entered.
Basic Settings
（
（
Door Phone &Intercom Phone
）
DND (Do Not
Disturb)
DND might be disabled phone for all SIP lines, or line for SIP
individually. But the outgoing calls will not be affected
Ban Outgoing
If enabled, no outgoing calls can be made.
Enable Call Waiting
The default value is enabled. Allow users to answer the second call
while maintaining the call.
Enable Call Waiting
Tone
The default value is enabled. When enabled, the call waiting tone can
be heard while waiting for a call. If this function is turned off, when
waiting for a call, the beep will not be heard.
Enable Intercom
Mute
If enabled, mute the incoming calls during an intercom call.
Enable Intercom
Tone
If enabled, play the intercom ring tone to alert the coming of an
intercom call.
Enable Auto Dial Out
Enable Auto Dial Out when timeout.
Auto Dial Out Time
Configure waiting time for timeout dialing.
Enable Auto Answer
Enable Auto Answer function
Auto Answer Timeout
Set Auto Answer Timeout
No Answer
Handdown
Enable automatically hang up when no answer
No Answer Auto
Hangup
Automatic hangs up when no answer occurs within the set time.
Auto Hangup
Set the time of no answer auto hangs up.
