20
Fanvil devices support SIP PnP, DHCP options, Static provision, TR069. If all of the 4 methods
are enabled, the priority from high to low as below:
PNP>DHCP>TR069> Static Provisioning
Transferring protocol: FTP
、
TFTP
、
HTTP
、
HTTPS
Details refer to
Fanvil Auto Provision
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3816f8d5f0.pdf
Table 7 - Auto Provision Parameters
Auto Provision
Parameters
Description
Basic settings
Current
Configuration
Version
Show the current config file’s version. If the version of configuration
downloaded is higher than this, the configuration will be upgraded. If
the endpoints confirm the configuration by the Digest method, the
configuration will not be upgraded unless it differs from the current
configuration
General
Configuration
Version
Show the common config file’s version. If the configuration
downloaded and this configuration is the same, the auto provision will
stop. If the endpoints confirm the configuration by the Digest method,
the configuration will not be upgraded unless it differs from the current
configuration.
CPE Serial
Number
Serial number of the equipment
Authentication
Name
Username for configuration server. Used for FTP/HTTP/HTTPS. If this
is blank the phone will be default for anonymous
Authentication
Password
Password for configuration server. Used for FTP/HTTP/HTTPS.
Configuration File
Encryption Key
Encryption key for the configuration file
General
Configuration File
Encryption Key
Encryption key for common configuration file
Save Auto
Provision
Information
Save the auto provision username and password in the phone until
the server url changes
Download Fail
Check Times
The default value is 5. If the download configuration fails, it will be
downloaded 5 times.
