16 / 52
www.fanvil.com
Current
Configuration
Version
Show the current config file’s version. If the version of configuration
downloaded is higher than this, the configuration will be upgraded. If the
endpoints confirm the configuration by the Digest method, the
configuration will not be upgraded unless it differs from the current
configuration
General
Configuration
Version
Show the common config file’s version. If the configuration downloaded
and this configuration is the same, the auto provision will stop. If the
endpoints confirm the configuration by the Digest method, the
configuration will not be upgraded unless it differs from the current
configuration.
CPE Serial
Number
Serial number of the equipment
Authentication
Name
Username for configuration server. Used for FTP/HTTP/HTTPS. If this is
blank the phone will use anonymous
Authentication
Password
Password for configuration server. Used for FTP/HTTP/HTTPS.
Configuration File
Encryption Key
Encryption key for the configuration file
General
Configuration File
Encryption Key
Encryption key for common configuration file
Save Auto
Provision
Information
Save the auto provision username and password in the phone until the
server url changes
DHCP Option
Option Value
The equipment supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom Option
Value
Custom option number. Must be from 128 to 254.
SIP Plug and Play (PnP)
Enable SIP PnP
If this is enabled, the equipment will send SIP SUBSCRIBE messages to a
multicast address when it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request their configuration.
Server Address
PnP Server Address
Server Port
PnP Server Port
Transportation
Protocol
PnP Transfer protocol – UDP or TCP
Update Interval
Interval time for querying PnP server. Default is 1 hour.