4
5.2 Appendix Table
5.2.1
Common
command
mode
Table 1 - Common command mode
Action
Description
IP Broadcast under
standby mode
In standby mode, long press the speed dial button for 3 seconds,
there will be a toot sound will 5 seconds, please press the speed
dial button once within 5 seconds, the toot sound will stop
automatically reporting IP
Switch network
mode
In the standby mode, long-press the speed dial button for 3
seconds and the beep will last for 5 seconds. Within 5 seconds,
press the speed dial button three times quickly to switch to the
network mode.
If there is no IP at present, switch to the default static IP
(192.168.1.128).
Then switch to DHCP mode when it is the default static IP
(192.168.1.128)
When DHCP gets to IP, then do not switch and report the IP
directly.
Report the IP after the successful switch.
5.2.2
Function key LED state
Table 2 - Function key LED state
Type
LED
State
Speed dial
Normally on
Successfully registered
Quick flashing
Registration failed/ network abnormal
Slow flashing
In call