- 13 -
If there are many persons records stored in the directory, you can use
to search the
person which you want to contact. Press
to forward
，
and press
to backward. Press
Soft2 (Dial) to dial the current number shown on the screen.
z
Direct dial
Direct dial means user can make calls directly without hook off or using handfree. User can dial
number in stand-by mode and then press Soft2 (Dial) to call. Use also can press Soft3 (Save) o
save the number to directory. In this way, user can not use #/time out or fix length to collect digits
and dial.
z
Multi-line calls
FV6030 supports 5 SIP lines max
，
that is user could use 5 SIP accounts to register and make calls.
User could use programmable key as SIP line key. When a line key is pressed, phone will use the
server to call. System will use SIP 1 as default line to call.
There are most two calls at the same time. Screen will display the incoming call number when
user is keep talking. You can press the corresponding line key (the led flash to indicate) or Soft1
(Answer) to accept it, and hold the first one (if you want to use this function, you need enable Call
Waiting of the phone first). Use Soft1 (Switch) to switch the two calls to talk. User can also use
Soft1 (Conf) to make the second call when there is just an active call.
3.3. End calls
z
Hang up with handset hook on
Hook on to finish talking.
z
Hang up with handfree
Press
to finish talk when phone is in handfree status.
Note: user can not finish talk by pressing
if phone is used handset to talk.
z
Hang up with headset
Press
to finish talk when the phone is using headset communication.
z
Hang up a active call with 2 calls
When there are two calls
，
user might use Soft1(Switch)to switch to the call you want to hang up
first. Then press # to finish talk, and phone will switch to the other call automatically.
Note
：
it is no use to press # to finish talk, if there is only one current call.
3.4. Call transfer
z
Blind Transfer
During talk, press
，
and then dial the number that you want to transfer to, and press #.
Phone will transfer the current call to the third party. After finishing transfer, the call you talk to
will be hanged up. User can not select SIP line when phone transfers call.
Summary of Contents for FV6030
Page 60: ... 60 ...
