Fanvil D900 User Manual Download

Page: 55 / 155

Android IP Video Phone D900 User Manual

phone will save the missed call log into the call history

record and display the missed calls on the idle screen,

or won’t save the missed call log into the call history

record and display the missed calls on the idle screen.

Dial without registered

：

Set call out by proxy without

registration.

Display

Configuring the phone screen displays a number of parameters, including

screensavers and power indicator

Tap "Display" ----> "Display" interface. After configuring the parameters,

you can click "Save" button to save successfully.

Screen saver

Tap "Display settings"----> "Screen saver" interface. After configuring the

parameters, you can click "Save" button to save successfully.

Summary of Contents for D900




























































































































































Search results

Summary of Contents for D900

Reviews:

Related manuals for D900

Brands by name

Popular brands

Fanvil D900, User Manual

Search results

Summary of Contents for D900

Reviews:

Related manuals for D900

Brands by name

Popular brands