Fanvil D900 User Manual Download

Page: 132 / 155

Android IP Video Phone D900 User Manual

130

Stop using HW overlay

Enabled, always use the GPU to the screen.

enforce

the

GPU

rendering

Enabled, mandatory use of GPU to 2 d drawing.

Mandatory to enable 4 x
MSAA

Enabled, in OpenGL ES 2.0 application to enable 4 x MSAA.

Simulation auxiliary display
device

Overlay view, can choose according to the proportion of
display window.

Enable the strict mode

Enabled, the operation is applied in the main thread executive
time scintillation screen.

Displays CPU usage

When enabled, the screen overlay display the current CPU
usage.

The GPU rendering mode
analysis

Enabled, the calculation of the adb shell dumpsys gfxinfo in
present time.

Enable OpenGL tracking

So you can use Logcat, Systrace or glGetError to follow up the
implementation of OpenGL.

Enable the trace

Enable tracking mode.

Do not keep activity

Enabled, the user left after the destruction of each activity.

Background process limit

Setting allows the number of background processes.

Display all "application not
responding" (ANR)

Enabled, application for the backend application shows "no
response" dialog.

About the phone

configuration item

meaning

Other system update

Through the server check the updates.

State information

Display system boot time.

Legal information

According to the open source license.

model

According to the unit type.

Android version

Display the current android version.

Kernel version

Display the current kernel version.

The version number

Show the current version number.

Summary of Contents for D900




























































































































































Search results

Summary of Contents for D900

Reviews:

Related manuals for D900

Brands by name

Popular brands

Fanvil D900, User Manual

Search results

Summary of Contents for D900

Reviews:

Related manuals for D900

Brands by name

Popular brands