Fantom Drives MGT-08SC08A, Installation Reference Manual

Page: 32 / 96

Getting Started
2-10
2.5 Powering-on the Subsystem
When you connect the Disk Array to the Host computer, you should press the
ON/OFF Power Supply Switch. It will turn the Disk Array on and the Self-Test
will be started automatically.
1. Plug in the power cord or power connector located at the rear of the
subsystem.
2. Turn on the power.
3. The “Power” LED on the front panel will turn green. After a few moments
the LCD should display the following message:
{Model Name}
xxx.xxx.xxx.xxx
Note:
The subsystem is equipped with PFC (power factor correction), Full
Range power supply. The subsystem will automatically selector
voltage.
!
Power
Switch
Power
Input
Socket