31
Shock absorber extension adjustment
To adjust, turn the extension adjuster in the lower part of the shock absorber until
a “CLICK” is heard. Rebound adjustment standard measures: 16 “CLICKS”. (Counter-
clockwise from fully closed position).
(A)
(B)
(A) - Extension adjustment
High compression adjustment
To adjust, turn the extension adjuster in the top part of the shock absorber
until a “CLICK” is heard. As the control is closed the compression will be harder,
on the other hand as it is opened it will be softer. Normally, the standard mea-
surement would be 24 clicks from the completely closed position.
(A)
(B)
(B) - Compression adjustment.
Spring adjustment
- Remove the seat and side covers.
- Loosen the air cleaner duct clamp screw.
- Remove the muffler.
- Remove the subframe with the air cleaner box.
Suspension spring
The standard spring is 5,2.
Preload: 10 mm.
(C)
(A)
(B)
(A) - Nut.
(B) - Spring.
(C) - Locknut.
- Tighten the locknut securely.
- After adjustment, move the spring up and down to make sure that the
spring is fully seated.
- Install the parts removed.
Rear shock absorber spring replacement
Harder and softer springs are available. If the standard spring is not adequate
for your purpose, select a proper one according to the rider´s weight and the
road conditions.
