37
Drive Chain Lubrication
Lubricate the drive chain after driving on wet terrein or when the chain looks
dry. A high viscosity oil is preferred rather than a lower viscosity because it
will stick to the chain longer and lubricate the chain better. Apply oil to the
sides of the chain rollers (A) for better oil penetration. Wipe off any excess oil.
(see table lubricants pag. 59).
(A)
(A) - Apply grease.
ENGINE OIL
Use a premium 4-stroke engine oil to lengthen the life of your motorcycle
(see table lubricants pag. 59).. We recommand to use the type SG oil with the
classification API.
The recommended viscosity is SAE 5 W-40. If it’s not possible, lookat the lower
table to find another viscosity.
Checking the oil level and making the changes periodically are twovery im-
portant operations to keep the engine in perfect shape.
After 5 hours of running of a new bike, remove and change the oiland the oil
filter. After that, you must change the oil every 10 hours or 500 kms.
NOTE
The engine oil expands and thus the level increases when it is hot.
Check and adjust the level when the motor oil is not hot.
Changing the oil and filter
The oil should be changed when the engine is hot, since this helps the oil to
go out through the drain located in the lowest part of the engine.
WARNING
The engine oil and the exhaust manifold can be very hot and cause burns.
Wait until the oil and the exhaust manifold are a little cooler.
WARNING
Engine oil is a health risk. Avoid any contact with this given that this could
provoke irritations and, in the worst cases, skin cancer.
- Keep new or used oil away from the reach of children and animals.
- Clean clothes sleeves and pants.
- Wash yourself with soap if oil has been in contact with your skin.
