3. Install In-Wall Smart Switch (Dual) to the gang box.
a. Live/Hot wire connection: Connect the Live/Hot wire to the “L” terminal on the In-Wall
Smart Switch (Dual).
b. Neutral wire connection: Connect the Neutral wire to the “N” terminal on the In-Wall
Smart Switch (Dual).
c. Load wire connection: Connect the 2 Load wires to the “OUT1” and “OUT2” on the
In-Wall Smart Switch (Dual).
d. External/manual Switch connection: Connect 2 18AWG wires to the “S1” and “S2” on the
In-Wall Smart Switch (Dual).
e. External/manual Switch connection: Connect 2 18AWG wires form the 2 terminals on the
External/manual Switch to the Live wire.
Note: This is the physical connection diagram for AC120V/230V power input
4. Mounting the gang box.
a. Position all wires to provide room for the device. Place the In-Wall Smart Switch (Dual)
inside the gang box towards the back of the box.
b. Position the antenna towards the back of the box, away from all other wiring.
Summary of Contents for FT132
Page 1: ...In Wall Smart Switch Dual...