Fantem In-Wall Smart Switch (Dual)
Fantem In-Wall Smart Switch (Dual) is a low-cost Z-Wave Switch specifically used to enable
Z-Wave command and control (on/off) of any wall switches. It can report immediate wattage
consumption or kWh energy usage over a period of time. In the event of power failure,
non-volatile memory retains all programmed information relating to the unit’s operating status.
It can connect to 2 external manual switches to control the load ON/OFF independently. Its
surface has a pin socket, which can be used for connecting to the touch panel, so you can also
use the touch panel to control the In-Wall Smart Switch (Dual).
The In-Wall Smart Switch (Dual) is also a security Z-Wave device and supports Over The Air
(OTA) feature for the products firmware upgrade.
Familiarize yourself with your In-Wall Smart Switch (Dual).
Notes for the wire connection ports:
N –
Power input for neutral
L –
Power input for live
IN
– Input for load power supply
OUT1
– Output for load 1
OUT2
– Output for load 2
Summary of Contents for FT132
Page 1: ...In Wall Smart Switch Dual...