3
Manual
NVMePCIe TR-1
Manufacturer Article No.: 2515
EAN: 4250273425154
2 d. Preparing the heat sink
Place the aluminum heat sink next to the slide-in tray. The side with the two prongs is
facing the front of the slide-in unit. The two prongs should engage under the anti-
vibration springs. Locate the positions of the two light colored mounting bolts in the area
where the NVMe will be inserted. The two matching holes in the heat sink are the middle
two. If these two bolt positions match the holes in the heat sink, you have the correct
orientation.
2 e. Attaching the heat sink
Remove the second protective foil from the thermal pad, slide the two prongs of the heat
sink under the anti-vibration springs and carefully press the heat sink against the
thermal pad. Screw the two long screws into the two mounting holes.
*)
