GB
GB
15
16
finder has been successfully removed from the Find
My app. Press and then hold the Smart Finder case
5 times in succession until you hear a long beep.
The Smart-Finder is now reset and ready to be
paired with a new Apple ID/iOS device.
Unwanted tracking
If a
Find My app
network device that has been
disconnected from its owner travels with you over
time, you will be notified and
Find My app
will send
a notification to your Apple devices. This feature is
available on iOS or iPadOS 14.5 or later. This feature
is specifically designed to prevent people from
tracking you without your knowledge.
FAQ:
1. How are the objects tracked?
When an item is separated from its owner for a
certain period of time, it can be found by other Apple
devices in Where Is? and the owner can start to track
the location of the device.
2. How to check if the device is turned on?
After receiving the device, press the button in the
middle of the device, and the device will beep,
indicating that the device has been started. If there is
no response, please try to reset the device, if still no
response, please try to replace the battery or contact
our customer service team for processing.
3. How does the device prevent unwanted
tracking?
If a Find My Network accessory that has been sepa-
rated from its owner stays with you over time, you will
be notified in one of two ways:
- If you own an iPhone, iPad, or iPod touch,
Where Is? sends a notification to your Apple device.
This feature is available on iOS or iPad iOS 14.5
or later.
- If you don‘t have an iOS device or a smartphone,
a Where‘s? network device that is away from its
owner for a period of time will make a sound when
it is moved.
4. Why can‘t I find the device with Bluetooth
connection?
Try resetting the device by clicking and holding
the button 5 times until you hear a beep, or you
can try replacing the battery, or you need to unpair
this device with another Apple ID first, and then try
connecting again.
Battery
FonTag Smart contains a button battery. The battery
may need to be replaced during the life of the pro-
duct. Replace it only with batteries of the same type
(CR2032) and value, and make sure the polarity is
correct.
Replacing the battery:
1.
Disassemble the product into two parts through
the gap between the top and bottom covers.
2.
Remove the battery.
3.
Insert the CR2032 battery into the Smart-Finder
with the positive (+) side facing up.
4.
Connect the top cover and the bottom cover and
press them firmly together.
