GB
GB
17
18
Safety and Handling
• The device contains sensitive electronic
components, including the batteries, and may be
damaged, impair functionality, or cause injury if
dropped, burned, punctured, crushed,
disassembled, or exposed to excessive heat or
liquid or environments with high concentrations of
industrial chemicals.
• Use the device only for its intended purpose,
according to these instructions for use.
• Do not use the device if it shows visible damage.
• The device is intended for household or similar use
only. It must not be used for commercial purposes!
• The product is not a toy for children, keep it out of
reach of children.
Technical data:
• MFi Certified
• Compatible with iOS 14.5 and above
• Triaxial SC7A20 acceleration sensor
• BT V 5.2
• BLE transmission power: +4dBm
• Transmission distance: 40-50m (open environment)
• Worldwide tracking
• Battery type: CR2032 non-rechargeable
• Voltage: 2.6V~3.6V
• Power consumption: 9.5mA MAX
• Working temperature: -20~60C°
• Protection class: IP67 weatherproof case
• Housing material: ABS + PC
• Size: 37 x 37 x 9mm
• Weight: 41g
No responsibility will be taken for any damage in
case of wrong operation.
If you need technical support, please contact our
support team by email at
.
Important information about button cells and
their disposal
Button cells do NOT belong in household waste.
As a consumer, you are required by law to return
used button cells for proper disposal. You can drop
off your button cells at the public collection points in
your community or wherever button cells of the same
type are sold.
• Button cells do not belong in the hands of children.
• Be sure to observe the correct polarity of the button
cells. Incorrectly inserted button cells can lead to
the destruction of the device - fire hazard!
• Button cells from which liquid escapes are
dangerous. Only touch them when wearing suitable
gloves.
• Do not attempt to open button cells and do not
throw button cells into fire.
• Button cells must not be recharged. Attention Ex
plosion hazard!
• Always use button cells of the same type together
and always replace all button cells in the device at
the same time!
• Remove the button cells from the device if you are
not going to use it for a long time.
Registration and Safety
Certification/General Information
We hereby declare, that this device carries
the CE mark in accordance with the
regulations and standards. It conforms with the
essential requirements of the RED directive 2014/53/
EU, as well as the RoHS 2 2011/65/EU directive.