8
4. Assembled blades
Put the receiver of remote control through hanger
bracket (as picture).
Connect the A.C. power supply wire that come from
the ceiling to the Brown and blue wire of receiver
which is mark with label “L” & “N”. In most cases,
RED / BLACK wire is LIVE is connected to “L”
BROWN wire, BLACK / BLUE wire is NEUTRAL is
connected to “N” BLUE wire.
Connect the 4 wires coming from the fan housing
with 4 wires coming from the other side of the remote
control receiver.
BRN TO BROWN (Live wire of fan)
BLUE TO BLUE (Neutral wire of fan)
ORG TO ORANGE (Live wire of light)
GRN/YEL TO GRN/YEL (Earth wire)
IMPORTANT : THIS APPLIANCE MUST BE EARTHED.
Twist the bottom plate of the housing to attaching the
blades to fan. You will see the screw holes for screwing
on the blades after twisting off the bottom housing
plate
.
Carefully un-wrap the blades. Slide one of the blades
into the slot of housing, then use the screw and paper
washer provided to screwing it tight. Please ensure the
screws are tightened firmly.
Repeat this process for all blades.
Put the bottom plate back when you have finish all the
blades assembly.
