14
Maintenance
1.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed. When cleaning, use
only a soft brush or lint free cloth to avoid
scratching the finish. Abrasive cleaning agents are
not required and should be avoided to prevent
damage to finish.
Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.
CAUTION
Periodic light dusting of the blades is recommended.
A feather duster will work best.
How to Clean Your Ceiling Fan Blades
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
How to Replace the Receiver
1.
Lift the upper housing of the motor assembly after
unscrewing the three screws. (Figure 1)
2.
Unplug the signal wire and 9-pin connector, then
replace the old receiver with the new receiver.
(Figure 2)
Housing-Upper
3.
Reinstall the upper housing to the motor assembly
using the previously removed three screws. (Figure 3)
4.
After installing the new receiver in your fan, follow the
"Remote Control Setting and Speed (RPM) Setting
Process" again (on page 13).
Figure 1
Figure 3
Figure 2
Signal Wire
Receiver
9-Pin
Connector