12
5.
Loosen the trim nuts from the light plate assembly.
Retain the trim nuts for reinstallation in next step.
(Figure 5)
How to Assemble Your Light Kit Assembly (continued)
Figure 5
How to Operate Your Ceiling Fan
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box (Figure 1).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
MAIN FUSE BOX
Figure 1
Trim Nut
Light Plate
Assembly
6.
Assemble the glass to the light plate assembly
using the trim nuts. Do not overtighten. (Figure 6)
Trim Nut
Glass
Figure 6
NOTE:
Receiver in controllers system features an
automatic learning function. There are no frequency
switches on the receiver unit. The receiver will
automatically scan the frequency from the hand held
control if an changes are made. the frequency settings
should be changed only in the case of interference or
if multiple ceiling fans with the same type of control
system are installed in the same structure.