4
This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
nstalled
ire ength
ire
i e
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 10). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
!
p to
ft
ft
Materials
iring outlet o and o connectors ust e of type
re uired y the local code
he
ini u wire would e a
conductor
wire with ground of the following si e:
NOTE:
Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
Motor Coupling
Cover Assembly (1)
Hanger Bracket
Assembly (1)
Motor Assembly (1)
Ceiling Canopy (1)
Wire Connectors (4)
ne
hillips head screwdriver
One stepladder
One wire stripper
One
lade
screwdriver
Tools Needed for Assembly
(Not Included)
Hand-held Remote (1)
Wall Holder (1)
Screws (2)
Battery (1)
Receiver (1)
Wire Connectors (6)
NOTE:
If you are uncertain of part description, refer to exploded view illustration.
1.
Check to see that you have received the following parts:
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts
supplied with this product and/or any accessories designated specifically for use with this product by Fanimation.
Substitution of parts or accessories not designated for use with this product by Fanimation could result in
personal injury or property damage.
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
Downrod/Hanger Ball
Assembly (1)
– Downrod
– Hanger Ball
– Set Screw
– Hairpin Clip
– Clevis Pin
– Pin
Hardware Bag
LED Bulbs (6)
Canopy Screw
Cover Assembly (1)
Safety Cable Kit
Safety Cable
(1)
Cable Clamp
(1)
Flat Washer,
Stainless Steel
(1)
Lag Bolt
(1)
12V 23A
