How to Install Your Light Bulbs
12
How to Install Your Canopy Housing
LED Bulb
Figure 1
1.
Install light bulbs into sockets by threading in a
clockwise direction. (Figure 1)
NOTE:
When relamping is required, USE ONLY
MAX 4W, TYPE T8 DIMMABLE LISTED LED
(LIGHT) BULB.
RISK OF FIRE. USE ONLY LED LAMPS IN THIS
LIGHT KIT. INCANDESCENT AND HALOGEN LAMPS
MAY CAUSE SEVERE THERMAL DAMAGE.
CAUTION
Figure 2
NOTE:
This step is applicable after the neccessary
wiring is completed.
Canopy Screw
Cover
1.
Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care
not to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 1)
2.
Securely attach and tighten the canopy screw cover
cover over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
Ceiling
Shoulder Screw
Canopy
Figure 1
