9
Installing the Canopy Housing
Figure 14a
NOTE: This step is applicable after the necessary wiring
is completed.
▲
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy housing
and not pinched between the housing and the ceiling.
2.
Securely attach and tighten the canopy screw cover
g
n
i
z
il
i
t
u
t
e
k
c
a
r
b
r
e
g
n
a
h
e
h
t
n
i
s
w
e
r
c
s
r
e
d
l
u
o
h
s
e
h
t
r
e
v
o
the keyslot twist-lock feature (Figure 14b).
Figure 14b
1.
Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed (Figure 14a).
Assembling and Mounting the Fan Blades
Assembling and Mounting the Fan Blades
Figure 16
Figure 15
2.
Remove and discard the
five
rubber motor stops
from the motor assembly by removing the screws.
(Figure 16)
1.
Remove and discard the coupler supporter from
motor assembly by removing the screws. (Figure 15)
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
Coupler supporter
Summary of Contents for FPD8088
Page 37: ......
