Housing/Switch Cup Adapter Assembly (Cont’d)
11
Figure 20
3.
Connect the 2-pin connector from motor assembly
4.
p
u
C
h
c
t
i
w
S
r
e
t
p
a
d
A
e
h
t
e
l
b
m
e
s
s
A
Assembly
onto the assembled Adapter with three screws.
(Figure 21)
Figure 21
Figure 22
Figure 23
5.
Install included minican bulbs into each of the two
sockets. (Figure 22)
6.
Secure glass bowl to light fitter using supplied nut.
Next, install trim cover followed by the
finial. Do not
over tighten. (Figure 23)
CAUTION
To reduce the risk of fire, use 75-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off
the wall switch and allow the bulb to cool for 10
minutes before relamping.
Bulb is pressurized and may shatter. DO NOT
TOUCH BULB WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove fingerprints
with alcohol prior to use.
to the 2-pin connector from the adapter switch cup
assembly. (Figure 20)
Summary of Contents for FPD8088
Page 37: ......
