6
How to Assemble Your Ceiling Fan (Downrod)-Cont’d
6.
Cut off excess lead wire approximately 6 to 9 inches
above top of the top of the downrod. Strip insulation off
1/2 inch from the end of each lead wire. (Figure 6)
1.
Remove the three motor coupling screws from
your fan and save for step 3. (Figure 1)
2.
Route your fan wires through the ceiling canopy
and place ceiling canopy onto your motor. (Figure 2)
3.
Alight the 3 big slots in the canopy to the 3 screws
in the motor coupler. Firmly attach the canopy cover
to the motor with the three screws removed in step1.
(Figure 3)
How to Assemble Your Ceiling Fan (Close to Ceiling)
NOTE:
All set screws must be checked, and retightened
where necessary, before installation.
Figure 6
WARNING
To avoid possible
fi
re or shock, be sure electricity is
turned off at the main fuse box before hanging.
(Figure 4)
Figure 4
MAIN FUSE
BOX
Figure 1
NOTE: MOTOR WIRES
HAVE BEEN OMITTED
FROM DIAGRAM
Figure 2
CANOPY
CANOPY TRIM
RING
MOTOR
ASSEMBLY
NOTE: MOTOR WIRES
HAVE BEEN OMITTED
FROM DIAGRAM
Figure 3
MOTOR
ASSEMBLY
Screws (3)
NOTE: MOTOR WIRES
HAVE BEEN OMITTED
FROM DIAGRAM
CANOPY TRIM
RING
