Hardware Documentation efus™A9X+ efus™A9Xr2
| 23
4.12 Parallel Camera (CSI)
Note: because an HW failure this pinout is just working HW Revision
≥1.20!
161
n.a./
CAM_YDATA0
I (2.8V)
*
CPU pad QSPI1A_SS0
163
n.a./
CAM_YDATA1
I (2.8V)
*
CPU pad QSPI1A_SCLK
165
CAM_YDATA4
I (2.8V) CPU pad CSI_DATA02
167
CAM_YDATA3
I (2.8V) CPU pad CSI_DATA01
169
CAM_YDATA5
I (2.8V) CPU pad CSI_DATA03
171
CAM_YDATA2
I (2.8V) CPU pad CSI_DATA00
173
CAM_YDATA6
I (2.8V) CPU pad CSI_DATA04
175
CAM_PCLK
I (2.8V) CPU pad CSI_PIXCLK
177
CAM_YDATA7
I (2.8V) CPU pad CSI_DATA05
179
CAM_YDATA8
I (2.8V) CPU pad CSI_DATA06
187
CAM_YDATA9
I (2.8V) CPU pad CSI_DATA07
183
CAM_MCLK
O (2.8V) CPU pad CSI_MCLK
we recommend oscillator on baseboard as MCLK
source for camera
189
CAM_VCAM
PWR
Camera interface voltage out (2.8V)
191
CAM_HREF
I (2.8V) CPU pad CSI_HSYNC
195
CAM_VSYNC
I (2.8V) CPU pad CSI_VSYNC
193
CAM_PWDN
O (2.8V) High active powerdown signal
197
CAMRST
O (2.8V) High active reset signal
130
I2C_C_DAT
I/O (3.3V) Data signal, 4k7 PU onboard
132
I2C_C_CLK
O (3.3V) Clock signal, 4k7 PU onboard
* : this signals are shared with SPI_B and are just available at a mounting option.
In case of using SPI_B just a 8bit parallel camera interface with YDATA2…9 is available.
Just leave LSBs on camera unconnected at standard mounting option.
For more information please also refer i.MX6SoloX documentation from www.nxp.com
4.13 Analog Video In
211
CAM_A_IN
Analog video input
50Ω
(NTSC/ PAL)
213
CAM_A_GND
Analog Ground for Video Input
207
CAM2_A_IN *
2
nd
Analog video input
50Ω
(NTSC/ PAL)
205
CAM3_A_IN *
3
th
Analog video input
50Ω
(NTSC/ PAL)
201
CAM4_A_IN *
4
th
Analog video input
50Ω
(NTSC/ PAL)
*: optional, not available on all mounting versions
