5. Attentions
1. DO NOT place the appliance close to flammable materials and heating appliances or wet
environments.
2. Add water into inner pot should comply with “Operation Instruction” chapter 2.
3. DO NOT break the seal ring. DO NOT replace it with other rubber rings, nor use tension rings
to make it sealed.
4. Check and wash anti-block filter regularly to keep PRV clean.
5. DO NOT open lid when floater is down.
6. DO NOT put anything on or use other object replace the PRV.
7. Never use the towel to close gap between lid and edge of outer pot.
8. Inner pot bottom and heat plate should keep clean. DO NOT put inner pot on other heat
sources. DO NOT replace it with other containers.
9. As inner pot with non-stick coating, only use wood or plastic ladle and spoon.
10. Keep hands and faces away from venting outlet on the PRV while gas is discharging.
11. When timer finishes countdown, appliance goes in keep warm mode. Unplug the appliance to
stop keeping warm. Keeping ingredients warm should not excess 6 hours, otherwise affect
ingredients' quality.
12. While lot of smoke coming out from lid during operation, unplug appliance immediately and
send to MANUFACTURER for repairing.
13. DO NOT move appliance when just finishing cooking. Only after appliance cool down
completely do move it. To move appliance, only take body handle, do not take lid handle.
14. If any trouble during operation, the appliance only can be sent to the repairing centre
authorized by MANUFACTURER for repairing.
15. DO NOT disassemble the appliance on your own or replace with non-special worn parts.
16. If the mains cord is damaged, you must have it replaces by licensed technician.
17. Keep the appliance out of the reach of children, otherwise it may cause burns, electric shock
and injury.
18. Make sure gas discharges completely before open lid.
19. Fit on water collection box before use. And clean it after each use.
20. Before carrying out any cleaning or maintenance work, always make sure that the appliance
is disconnected from the mains supply by unplugging the power cord from socket-outlet.
