Lumina 38
House setup
30
Air inlet in use
Setting indicating the number of air inlets to be used.
Tunnel inlet in use
Setting indicating the number of tunnel inlets to be used.
Number of stages M/MT-
phase
Setting indicating the number of stages to be used in the combi-table.
Number of stages T-
phase
Setting indicating the number of stages to be used in the combi-table.
Number of relays
Setting indicating the number of relays you want to use for the extra fans.
Use desert control
Setting indicating if a separate warm climate table is used.
Temperature offset
Setting indicating the temperature offset (only if warm climate table is used).
Switch delay
Setting indicating the switch delay time between the 'normal tunnel inlet' and the 'warm
climate tunnel inlet' (mm:ss) (only if warm climate table is used).
The
desert control
can be used to enable the tunnel inlets in minimum ventilation. By using this setting
coolpads can be used earlier in the combi table to cool the air. This is energy efficient and will provide a
more stable temperature for the animals. The
desert control
will be only applicable when the outside
temperature is heigher than
Setpoint house
+
Temperature offset
for a minimum time of the set
Switch
delay
.
Make sure coolpads can be modulated sufficiently to a low capacity.
HOUSE SETUP
→
tab page
Clocks
Registration
Setting indicating if registration inputs are used.
Use clocks
Setting indicating if clocks are used.
Light clock
Setting indicating if light clocks are used.
Light relay
Setting indicating if light relays are used.
Light control
Setting indicating if light control is used.
Light measurement
Setting indicating if light measurement in the house is used.
Feed clock
Setting indicating if feed clocks are used.
Feed registration
Setting indicating if feed registration is used.
Summary of Contents for LUMINA 38
Page 1: ...g...
