Fancom 743
INSTALLER: 5. System settings
13
5.3.6
Storage silo
Circuit number
Enter to which circuit this storage silo belongs:
0 = no circuit; 1 = circuit 1; 2 = circuit 2.
Port. to max. sens
Enter how many portions can still fit into this storage silo, if the maximum
sensor is not covered (
Stor. silo dem. =
DEMAND).
Port. to fill. sens
Enter how many portions can still fit into this storage silo, if the filling
sensor is not covered (
Stor. silo dem. =
FILL).
Valve position
Enter how long it will take (minutes and seconds) before the feed reaches the
reverse valve after dosing out has started.
Reverse valve
Enter how long (minutes and seconds) the reverse valve needs to open or
close fully.
Auger aft. run
Enter how long (minutes and seconds) the storage silo auger must continue
running after the feed has passed the reverse valve.
5×
>>Storage
silo
1
Circuitnummer 0
Port.tot max.sens 0
Port.tot afv.sens 0
Positie klep 0:00
Omschakel.klep 0:00
Auger nalopen 0:00
Max.senser 0. 0
Afvulsensor 0. 0
Min.sensor 0. 0
Relay auger 0. 0
Status OFF
Relay klep 0. 0
Status OFF
Relay pulse 0. 0
Status OFF
Hvh
/
voerpulse
>>Storage silo
1
Circuit number 0
Port.to max.sens 0
Port.to fill.sens 0
Valve position 0:00
Reverse valve 0:0
Auger aft.run. 0:00
Stor.silo dem. DEM
Max.sensor 0. 0
Fill.sensor 0. 0
Min.sensor 0. 0
Relay auger 0. 0
Status OFF
Relay valve 0. 0
Status OFF
Relay pulse 0. 0
Status OFF
Am./feed pulse 0.0
%Tolerance 100
Batch am. 250.0
Max. Batch 2000.0
Min. Batch 250.0
Release house 0. 0
Status OFF
