background image

35

the Fanatec

®

 SDK.

7.3.6  Force Effect, Spring Effect, Damper Effect

FOR range: OFF   010 … 120 

 

FOR default: 100 (%)

SPR range: OFF   010 … 120 

 

SPR default: 100 (%)

DPR range: OFF   010 … 120 

 

DPR default: 100 (%)

These force feedback modifiers give you the ability to change the force feed-

back signals of a game (only applicable if game uses these effects). In theory 

there are three types of signals which a game can send: Force (pushes the 

wheel into a specific direction), spring (pulls the wheel towards the dynamic 

centre) and damper (creates friction). Not every game uses all types of effects 

and some games even use only one type to create all different feelings. Using 

your Tuning Menu in the Podium Racing Wheel F1® you can increase or re-

duce these different effects individually.

Note: 

If SPR is set to low values or ‘OFF’ the Podium Racing Wheel F1® will 

not be able to move the attached steering wheel to correct centre position after 

calibration run.

 IMPORTANT:

 Only set these values higher than 100% if the force feed-

back effects are clearly not strong enough and weaker in comparison to 

other games. When the game sends full effects and the wheel is set to 

100%, the device will work at its power limit. Pushing up one value to a 

very high number or even raising multiple values will result in higher load 

on the motor and increased heat development.

For further information check the FAQ section on our website

www.fanatec.com/support.

7.3.7  Natural Damper

NAT DMP range: OFF … 100 

 

NAT DMP default: 050

The natural damper will give you an additional damper which you can adjust 

from OFF to 100. At 100 you will have the strongest dampening effect which 

reacts to the acceleration and angle of your steering. If you turn it OFF, your 

steering will have no additional damping, making it easier to turn the wheel. 
The Natural Damper is a useful setting to reduce unwanted wheel oscillation. 

Oscillation is typically caused by latency in the feedback loop, and is more 

apparent in racing games that are not optimised for high-torque motors. The 

Summary of Contents for PODIUM F1






















































Reviews: