13
ASSEMBLY
6.1 Plan your configuration
To operate the Podium Racing Wheel F1® plug your steering wheel onto the
Quick Release of the Podium Wheel Base DD1 PS4™ and get started. Con-
nect the Podium Racing Wheel F1® to your PlayStation
®
4 system or PC* by
using the USB cable.
Please check the ‘Connections’ chapter to see which kind of peripheral devices
must be connected to which socket on the Podium Racing Wheel F1®. All de-
vices have to be connected to the Podium Racing Wheel F1® before powering
ON to allow proper detection and operation.
6.2 Mounting the Podium Racing Wheel F1® using the ClubSport
Table Clamp V2
While it is recommended to hard-mount the Podium Racing Wheel F1® to a
dedicated cockpit, it is possible to use on a strong flat surface using the Fa
-
natec ClubSport Table Clamp V2. Just bolt the Podium Racing Wheel F1® to
the Table Clamp with four bolts on the underside of the base.
•
You need to take apart the angled plate by loosening the Allen bolt to
remove the rod.
•
Then you can bolt the plate on the Podium Racing Wheel Base but be
careful!
Pay attention to the length regulation on page 14!
•
Now insert the rod and tighten it with the Allen bolts.
•
Open the two metal bolts as much as you need to place on the table.
•
Tighten the two metal table clamp bolts. Ensure that the table clamp’s feet
remain well aligned with the bottom of the table plate.
6
*
PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe
Summary of Contents for PODIUM F1
Page 1: ...www fanatec com Manual EN...
