6
6
To get started with using the GT DD PRO, decide on whether you will hard-
mount the wheel base and pedals or use the CSL DD Table Clamp, connect
your steering wheel via the Quick Release system, then connect the GT
DD PRO to your PlayStation
®
5 console or PlayStation
®
4 console using the
included USB cable. It is important to follow the chapter sequence of this
manual for an effective assembly and setup procedure.
ATTENTION:
See chapter 4.6 “Connections” for which type of peripheral
devices must be connected to which port at the rear of the GT DD PRO.
All devices have to be connected to the GT DD PRO before powering ON
to allow proper detection and operation. Only use the included USB cable
from your GT DD PRO package contents to avoid damages! Ensure there is
enough space around the wheel base to allow for air to circulate. Passive air
circulation is sufficient.
ASSEMBLY
PLAN YOUR SETUP
4
4.1
