FANATEC DD PRO, Manual

Page: 34 / 38

30 30
Problem description Solution
The Tuning display does not show anything
or is not working properly.
Try to use another steering wheel. If this is
also not working properly the GT DD PRO
may be damaged.
Check the pins inside the Quick Release of
the steering wheel. These must not be bent or
damaged.
After booting on the GT DD PRO, the start-up
calibration is not working properly.
Ensure that you have updated your GT DD
PRO to the latest firmware version which can
be downloaded from Fanatec.com/driver .
After start-up calibration of the GT DD PRO,
the attached steering wheel does not return
to the correct centre position.
The wheel base might require a manual
centre calibration. See chapter 5.4 “Centre
Calibration” of this manual for more details.
RevLEDs, FlagLEDs and / or display does not
work in specific games.
Older titles may not support recent wheel
bases. A possible solution is to switch to
the “PC Compatibility Mode” ( LED). Also
please check out our PC suite “FanaLab”
which may add support for some titles and
features.
How can I get in contact with Fanatec
customer support?
There is a chat service on our website, or
you can create a Support Ticket via the ‘My
Products’ section of your Fanatec account.
Fanatec.com
The PC driver or the wheel base does not
recognise the CSL Pedals.
Make sure that you have updated your wheel
base and ClubSport USB Adapter firmware to
the latest firmware version contained within
the latest PC driver which can be downloaded
from fanatec.com/driver .
Ensure that the used RJ12 cable is only that
which is included in the CSL Pedals package
content.
Ensure that the RJ12 cables are plugged in
the correct ports of the CSL Pedals located
on the gas pedal module and the correct
ports of the wheel base and ClubSport USB
Adapter.
The CSL Pedals pedal signals are not
correctly indicated or verified by the PC
driver after start-up.
When starting-up the CSL Pedals in ‘Auto
calibration mode’, every pedal lever must
initially be pushed to the maximum position
and then fully released back to the minimum
position. See chapter ‘Pedal auto calibration
mode’ of this manual for more details.