22
Shifter Calibration Mode:
To enter
the H-pattern shifter calibration mode
press <START> + <tuning menu> at
the same time: Put the H-pattern shift-
er into the position shown on the LED
display and acknowledge each single
position by pressing <START> to get to
the next one:
. . . . . . . . . . . . . . . .
neutral position
. . . . . . . . . . . . . . . . . . . . . . . . . .
rear
. . . . . . . . . . . . . . . . . . . . . . .
1
st
gear
. . . . . . . . . . . . . . . . . . . . . . .
2
nd
gear
. . . . . . . . . . . . . . . . . . . . . . .
3
rd
gear
. . . . . . . . . . . . . . . . . . . . . . .
4
th
gear
. . . . . . . . . . . . . . . . . . . . . . .
5
th
gear
. . . . . . . . . . . . . . . . . . . . . . .
6
th
gear
. . . . . . . . . . . . . . . . . . . . . . .
7
th
gear
If your shifter has no 7
th
gear just acknowledge it by pressing <START>
when the shifter is physically in position of 6
th
gear. After all gears are
calibrated the LED display shows S_1 and the shifter is ready for use.