14
5.3 Wheel rim
After you have installed all the button boxes and the FunkySwitch
TM
you can
install the wheel rim. Make sure you use the washers W1 (13.5 mm x 2.5 mm;
included in Universal Hub box) if you are not installing button boxes on all four
sides equally.
You need to use M5 screws with a max. length of 16 mm in order to avoid a
collision with the PCBA inside the Universal Hub. For third party rim use the
screws S3 (M5 x 16 mm) which are included in the Universal Hub box.The
FANATEC
®
wheel rims come with the correct screws.
In case your wheel rim does not have holes yet you can use the drilling tem-
plate on the next page to drill the correct hole pattern.
