12
After mechanical installation of the FunkySwitch
TM
you need
to make sure that the arrow is located on the top side. If this is
not the case you can loosen the small worm screws and turn
the FunkySwitch
TM
.
The button boxes can be mounted to short or long levers and on each of the
three sides of the button box.
Electrical
The FunkySwitch
TM
needs to be plugged in at long socket labeled (Funky-
Switch
TM
_1). Connect the plug of the button box cable to any of the remaining
5 plugs on the PCB labeled BUT_2 to BUT_6.
IMPORTANT:
Please mind the correct direction of the plug and use no
force to connect the plugs!