15
FANANI / ASSEMBLY INSTRUCTIONS
T.2T ZIP
T.2T ZIP
14
FANANI / ASSEMBLY INSTRUCTIONS
1)
ROLLER BLIND STARTING
Connect the motor (see electrical connection) to the test cable.
Bring the bottom rail about cm 20 far from the box.
2)
UP LIMIT SWITCH
Press the
button to reach the top limit switch until the motor stops automatically (bottom
rail stops against the box).
UP
WARNING: KEEP PRESSED THE UP BUTTON WITHOUT RELEASING IT TILL THE
BOTTOM RAIL STOPS AGAINST THE BOX AND THE MOTOR PERCEIVES THE
OBSTACLE AND MEMORIZES THE LIMIT SWITCH
i
6)
LIMIT SWITCH CANCELLING
Erase the limit switches following this procedures :
7 Limit switch programming with push button panel (test cable)
Limit switch programming with push button panel (test cable) 7
follow 3)
Press the
button until the motor confirms the
operation with a
.
PROGRAM
CLICK
3)
DOWNWARD LIMIT SWITCH
Press the
button up to the desired limit switch position ;
the
button to stop.
DOWN
release
DOWN
“clic”
“clic-clic”
5)
END OF SETTING
At the end of the procedure check the limiti switches.
20 ca.
“STOC”
7-1)
Push
Button
PROGRAM
7-2)
Keep pressed the
button
and at the same
time press the
button
PROGRAM
DOWN
7-3)
Release the
button but
keep pressed
the
button
PROGRAM
DOWN
7-4) keep pressed
the
button
and at same time
press the
button
again
DOWN
PROGRAM
Motor will confirm
the operation with
a
DOUBLE CLICK
i
IMPORTANT: It is suggested the use of a “dead man” push button (NOT PROVIDED).
Summary of Contents for myShell T.2T ZIP
Page 1: ...Rev 1 03 17 T 2TZIP ASSEMBLY INSTRUCTIONS...
Page 2: ......
