background image

13

14

[After Use]

[Adjusting P

osition]

Buffer Pad

Back Pad

Velcro

Foot Shiatsu Mat

n

 To extend the foot slide:

After the foot slide finishes its automatic adjustment, press the EXTEND button under 
FOOT SLIDE.

n

 To shorten the foot slide:

After the foot slide finishes its automatic adjustment, press the SHORTEN button 
under FOOT SLIDE.

Adjusting Position

Foot Slide Sensors
The Foot Slide Adjusting Function uses sensors located in the ankle area of the Foot 
Unit to determine if the footrest needs to be lengthened or shortened.
Sit with your ankles firmly against the wall of the Foot Unit so that the sensors can 
work properly.

*If your ankles do not seem to be touching the wall of the Foot Unit, adjust the reclining position or the foot-

rest position until the footrest fits firmly around the legs and feet.

Foot Slide Automatic Adjusting Function

l

 Be careful not to catch feet or other objects in between the footrest 

units when foot slide function is activated.

Warning

l

 If the stimulation is too 

intense, remove the foot 
shiatsu mat.

Caution

Head Rest

Buffer Pad

Two head rest pads (small and large) are provided 
for use with the chair. Use them to keep your head in 
a comfortable, natural position during your massage.

l

 The small head rest pad is attached to the chair 

with velcro, so it can be moved about. Move the 
small head rest to match the height of your 
head before starting the massage.

There is a buffer pad (thin) located behind the back pad 
that helps absorb some of the roller stimulation. Remove 
the buffer pad if you find the massage too light. Replace 
with accessory buffer pad (thicker) in the opposite case. 

Foot Shiatsu Mat

The HCP-27D comes with a foot shiatsu mat. 
The foot shiatsu mat can be placed in the 
foot unit if so desired.

l

 Make sure to turn the POWER switch to OFF after every use and to unplug the chair from 

the wall outlet.

Accident or injury could result if children or pets try to play with the chair.

l

 Be sure to return the reclining seat back to the upright position and lower the footrest com-

pletely after using the chair.

l

 Wipe the chair off after every use, and store your chair in a place free of excess humidity.

l

 Don't pull on the cord to unplug the chair from the wall outlet; be sure to grasp the plug 

firmly when unplugging.

l

 If you will not be using the chair for some time, be sure to unplug it from the wall outlet.

Caution

After Use

Summary of Contents for inada HCP-27D

















Reviews: