[Manual Selection Mode]
[Manual Selection Mode]
19
20
4
Manual Selection Mode
How To Operate Manual Selection Mode
How To Adjust Each
To stop in the middle of a massage, push the POWER button on the remote to bring the rollers back to storage
position and end the massage action.
In an emergency or if some malfunction occurs, use the STOP button to stop the chair immediately. After confirming
safety, press POWER button. Rollers stop after going back to storage position.
Changing from Manual Selection Mode to a Healthcare Program
If you press Healthcare Program button during Manual Selection Program with remote control panel closed, rollers
once go back to storage position to start with automatic Shiatsu Point locating and Healthcare Program.
Changing Programs
Stopping in the Middle of a Massage
2
1
3
Use the buttons to select your
desired massage.
Press POWER button.
Flip open panel on remote control to show
Manual Selection buttons.
If no selection is made within five minutes,
the power automatically shuts off.
The rollers return to storage position
(upper part of seat back).
The massage action is
completed in 15 minutes.
Operation is complete.
If you feel the massaging action too strong, reduce the stimulation according to this Operating Man-
ual. If this solution does not work, stop using and contact the store where you purchased the chair.
→
May result in injury if constantly used on a high stimulation level.
Do not place hands or feet into the roller tracks or into the space between the seat back
and the seat or into moving parts. Do not sit wearing hard object like hair accessories.
If your leg or foot gets out of the foot rest during the massage, don't try to force it back in.
Forward
Kneading, Human Touch, Kneading &
Tapping: Buttons toggle among
FORWARD
,
BACKWARD
, and
STOP
.
Backward
Massaging speed can be adjusted with either FAST or
SLOW button in a phase manner during Kneading,
Kneading & Tapping, or Tapping 1 action.
Speed can also be changed during the massage.
Adjust air massage intensity on foot, calf, and
seat respectively. Button toggles among
Me-
dium
,
High
, and
Low
.
Adjusts back massage intensity at any level.
Speed
Left display shows when Kneading action
speed has been set at 4.
Speed levels:
Keading
6 levels (Speed 1 to 6)
Kneading & Tapping, Tapping 1
4 levels (Speed 1 to 4)
Roller width can be adjusted among 3 "Narrow",
"Medium", or "Wide" during Rhythm Shiatu 1, Tap-
ping 1/2, Full/Partial Roller, or Back Vibration action.
Width can also be changed during the massage
* However, this function is not available if action which
does not allow width adjustment like Kneading, Human
Touch, Kneading & Tapping, Rhythm Shiatsu2 is com-
bined with Roller or Back Vibration.
Display
Action
Button
Display
Description
Action
Display
Description
Action
Button
Description
Action
Button
Narrow
Medium
Wide
Width
* Center of Partial Roller range can be adjusted in Partial Roller mode.
When using Full Roller Massage, the UP and DOWN buttons will
change the direction of the rollers.
Up/Down
Moves roller position to desired with this
button during Keading, Human Touch,
Keading & Tapping, Rhythm Shiatsu 1/2,
Manual Shiatsu 1/2, Tapping 1/2, Partial
Roller, or Back Vibration action.
Width Adjustment Buttons
SPEED ADJUSTMENT Buttons
UP DOWN Adjustment Buttons
Toggling between FORWARD and BACKWARD direction
Air Pressure Adjustment Buttons
Intensity Buttons
You can change programs without waiting for the selected program to finish.
In this case, timer would be reset, but massaging action is to stop once 30 minutes later, rated duration.
Caution
