[M
ANU
AL SELEC
TION]
❹
❹
25
❶
Press the
button.
If no selection is made within 5 minutes, the power shuts off
automatically.
❷
Press the button for the desired massage.
Choose the desired session.
The chair will recline for a short time.
❸
The shoulder positions can be adjusted.
After the shiatsu points are located, the up/down buttons for
shoulder position adjustment fl ash alternately. The shoulder
positions can be adjusted while the buttons fl ash. If no adjustment
is required, do not use these buttons.
[Note] Please place your head on the seat back while you are
seated deeply in the chair in a comfortable position. If your body
is raised off the chair, shiatsu points cannot be located accurately.
❹
The session starts.
When shiatsu point locating is completed, the session starts.
During a session, you can adjust the mechanical or air intensity.
❺
Program completed.
When the massage program fi nishes, the rollers return to their
storage positions (upper part of the seat back). Then the power
to the remote control is shut off . However, the reclining of the
seat back and the up or down adjustment of the leg rest can still
be operated.
MANUAL SELECTION
Roller Position Adjustment
When rolling is not selected:
The roller position can be adjusted to the
area that you want to massage.
▲
The rollers move up while this
button is pressed.
▼
The rollers move down while this
button is pressed.
When full rolling is selected:
Changes between up and down.
▲
When pressed during a down
movement, changes to up.
▼
When pressed during an up
movement, changes to down.
When partial rolling is selected:
The center position of the range of partial
rolling can be adjusted. The position at
which you release the button becomes the
center of the operation.
▲
The rollers move up while this
button is pressed.
▼
The rollers move down while this
button is pressed.
●
When up (or down) is selected when the roller is already at the highest (or lowest) position or in the shoulder position where
the shiatsu points were located, a warning alarm sounds.
Caution!
●
If neither a basic operation nor rolling has been selected, there will be no operation even if you press a ROLLER button.
❶
❷
❸
Operation of Parts and Position Adjustment
