[BEFORE USE]
[POSITION ADJUST
MENT
]
15
BEFORE USE
Checking the Seat Cover
Before using the chair, check the seat cover for tearing with the following procedure.
①
Open the zipper.
②
Disconnect the air hose from I-Shaped Connector.
ファスナー
I-Shaped Connector
③
Fold the back pad forward, and check by touching with
your hands that the chair fabric is not damaged.
Back Pad
Chair Covering
Caution
●
Be sure to check for tearing on the chair before every use, as shown in the illustration. Also, check the other parts for
tearing. Unplug the chair and contact the “Repair Service Center“ (see back page) for assistance. Never use the chair
with the chair covering removed or with holes or tears in the covering, because doing so is extremely dangerous.
Zipper
POSITION ADJUSTMENT
How to Sit
When the chair is off, the rollers are normally drawn back into the left and right sides of the upper part of
the seat back (Storage Position). For safety, first check the position of the rollers. If they are in any position
other than the storage positions, turn the main POWER switch ON before sitting down to allow the rollers
to return to their storage position. When you finish checking, sit down slowly in the center of the seat.
Caution
●
Do not sit down on the chair with the leg rest raised.
→
Any sudden impact on the leg rest could cause damage to the mechanism. Also, an accident or injury may result if the chair tips over.
●
Before using, raise the reclining seat to its fully upright position. Then recline the seat back slowly to the most
comfortable position, remembering to start off with a lighter massage.