[BEFORE USE]
Black Air Hose
Red Air Hose
White Air Hose
12
How to Remove and Install the Armrests
If the clearance of the transportation passageway is less than 100cm (39 inch) cm, removing the armrests is
recommended before transporting the chair.
Minimum product width when armrests installed: Approx. 95cm (37 inch)
Minimum product width when left armrest removed: Approx. 78cm (31inch)
For safety, before removing or installing the armrests, turn off the main power and disconnect the power cord
connector from the power connector on the chair.
* For installation, perform the procedure in reverse.
Read the installation precautions carefully.
①
Open the zipper on the armrest.
②
Remove the air hose and harness.
●
Installation precautions
Insert the power cord into the power connector, turn on the main
power and use the reclining button on the operating mechanism to
raise the chair to its fully upright position. Then, pull the leather by
hand to straighten out the wrinkles, and close the zipper.
*For details on turning on the main power, see page 10.
●
Installation precautions
Arm Rest(Left)
