1. In shutdown mode, press the [SET] button to switch to user 2, which can be switched cyclically.
10.2Setting time, date and kPa/mmHg unit selection
The unit automatically records the date and time of each measurement, which is very important.Because the blood pressure
of the human body is constantly changing on the same day, it is recommended that you set the correct date and time
immediately after installing the battery.Please set the correct date and time as following,(Example: enter time and day -12:08
pm. on December. 08th )
1. In the shutdown mode, press the [SET] key for 3 seconds, the product enters the function setting mode (if not selected, the
system defaults to the manufacturing time).The last two digits of the year will flash on the screen. You can enter the year by
pressing the [MEM] button (for example, you can increase the year from 21 to 22 by pressing it one time).
2.Press the [SET] button, and there will be a jump of the month in the left corner of the screen. At this time, the first digit of the
month starts to flash. You can enter the month by pressing the [MEM] button (for example, you can increase the month from
January to 12 months by pressing 11 times).
3.Press the [SET] button again, the screen will switch to the date setting, at this time, the last two digits of the date will start to
flash. You can enter the date by pressing the [MEM] button (for example, you can change the date from 1st to 08th by pressing
the button 7 times)
