25
ENGLISH
Canceling the SAVE process
To cancel the save operation and exit the SAVE menu, simply press the MODE button. The changes
you have made will be retained, as shown by the "?" next to the SAVE menu item, but will not be
saved.
Discard changes
If you do not want to save the changes made, there are two ways to cancel the settings:
Simply select a different kit without saving and the changes will be lost.
UNDO/REDO
If you press the MORE button before you have saved, an UNDO function is available instead of the
SAVE function. If you confirm your selection, the changes you have made are reset, but remain
temporarily saved.
If you now press the MORE button again, you will receive a REDO command for selection. Now you
can restore the previously discarded changes.
The UNDO/REDO function is ideal for comparing new settings with the original kit. This function
allows you to switch between two kit versions. Whereas during a sound check, for example, you can
easily check whether the new toms work better in a band mix or not.
The individual menu PAGES are explained below in the following. To call them up, scroll with the
PAGE UP
▲
- and
PAGE DOWN
▼
-buttons on the right of the display.
Please note that some menu pages only affect the complete kit, while others change the settings of
the individual drum channels. In order to let you know on which page settings for the individual drum
channels can be made, the respective sections are marked as follows:
*= Page for settings of individual drum channels within the kit