14
ENGLISH
Zone:
The zones are sound areas to which different sounds are assigned depending on the type of
drum channel (e.g. TOM, SNARE). The different types of pads, in turn, have playing areas (zones)
that match the corresponding (sound) zones. Please note that you may not be able to use all sounds
if you connect a pad where the playing areas do not correspond to the zones of the drum channel. For
example, if you use a tom pad on a CYMBAL channel, you will not be able to trigger all sounds.
2.
Connections
12V DC:
Here you connect the external power supply unit.
MIDI IN:
Connect your module to the output of an external control device to receive MIDI signals.
MIDI OUT:
Connect your module to the input of an external control device to send MIDI signals.
Channels:
Connect your pads to the respective input as labeled. Since the input sockets are stereo,
you should only use stereo cables.
OUT 1 to 4
Connect the input of your mixing console or amplifier to the
FAME Hybrid PRO
. The
outputs OUT1 and 2 are factory set to reproduce the complete mix signal as a stereo sum. Outputs
OUT 3 and OUT 4, however, contain the respective BUS signal. If necessary, you can also assign BUS
signals (BUS1 and BUS2) to OUTs 1 and 2. You make this setting on the MIXER-UNIT-OUT page.
PHONES:
Connect a standard headphone here. The desired volume can be adjusted with the LEVEL
control on the right below the display.
LINE IN:
Connect an external sound source here. You can use a stereo cable (e.g. from your
smartphone) or a mono cable if you want to hear a live monitor signal via the
FAME Hybrid PRO
. If
you connect a mono cable, the audio signal only sounds "centred" if you select "Mono" in the MIXER-
UNIT menu on the OUT page.
Allocation of the jack plug
All pads are connected with stereo jack cables. The "Tip" of the connector carries the trigger signal for
the main zone, whereas the "Ring" signal controls other zones or functions respectively.
Output possibilities
The
FAME Hybrid PRO
offers you an optimal "output solution" for every situation. From a simple
stereo total mix on the headphones to individual monitor and playback setups you can realize almost
everything with the routing possibilities of the
FAME Hybrid PRO
. Up to four individual outputs
(direct-out signals) can be used for live or studio applications.