Famco Hpmont HD3N-4T011-L, Manual, Page: 76 / 95

Appendix A Parameters Shenzhen Hpmont Technology Co., Ltd.
- 66 - HD3N-L Series User Manual V1.0
Ref. Code Function Setting Range Default Unit Attribute Setting
F03: Acc. and Dec. Parameter (on pages 30 - 31)
F03.00 Acc. speed 0.020 - 9.999m/s 2 0.700m/s 2 0.001m/s 2
×
F03.01 Start Acc. jerk 0.020 - 9.999m/s 3 0.350m/s 3 0.001m/s 3
×
F03.02 End Acc. jerk 0.020 - 9.999m/s 3 0.600m/s 3 0.001m/s 3 ×
F03.03 Dec. speed 0.020 - 9.999m/s 2 0.700m/s 2 0.001m/s 2 ×
F03.04 Start Dec. jerk 0.020 - 9.999m/s 3 0.600m/s 3 0.001m/s 3
×
F03.05 End Dec. jerk 0.020 - 9.999m/s 3 0.350m/s 3 0.001m/s 3 ×
F03.06 Inspection Acc. speed 0.020 - 9.999m/s 2 0.200m/s 2 0.001m/s 2 ×
F03.07 Inspection Dec. speed 0.020 - 9.999m/s 2 1.000m/s 2 0.001m/s 2 ×
F03.08 Emergency run Acc. speed 0.020 - 9.999m/s 2 0.200m/s 2 0.001m/s 2 ×
F03.09 Emergency run Dec. speed 0.020 - 9.999m/s 2 0.200m/s 2 0.001m/s 2
×
F03.10
Motor auto-tuning Acc.
speed
0.020 - 9.999m/s 2 0.100m/s 2 0.001m/s 2
×
F03.11
Motor auto-tuning Dec.
speed
0.020 - 9.999m/s 2 0.100m/s 2 0.001m/s 2 ×
F03.12 Stop Dec. jerk 0.020 - 9.999m/s 2 0.350m/s 2 0.001m/s 2
×
F04: Analogue Curve Parameters (on pages 31 - 31)
F04.00 Setting curve
0: Line 1
1: Line 2
0 1
×
F04.01 Line 1 Min. setting 0.0% - F04.03 0.0% 0.1% ○
F04.02
Corresponding value of line 1
Min. setting
0.0 - 100.0% 0.0% 0.1% ○
F04.03 Line 1 Max. setting F04.01 - 100.0% 100.0% 0.1% ○
F04.04
Corresponding value of line 1
Max. setting
0.0 - 100.0% 100.0% 0.1% ○
F04.05 Line 2 Min. setting 0.0% - F04.07 0.0% 0.1% ○
F04.06
Corresponding value of line 2
Min. setting
0.0 - 100.0% 0.0% 0.1% ○
F04.07 Line 2 Max. setting F04.05 - 100.0% 100.0% 0.1% ○
F04.08
Corresponding value of line 2
Max. setting
0.0 - 100.0% 100.0% 0.1% ○
F05: Speed Parameters (on pages 31 - 32)
F05.00 Multi-speed 0
0.000m/s - F00.02 (elevator
rated speed)
0.000m/s 0.001m/s ○
F05.01 Multi-speed 1
F05.02 Multi-speed 2
F05.03 Multi-speed 3
F05.04 Multi-speed 4
F05.05 Multi-speed 5
F05.06 Multi-speed 6
F05.07 Multi-speed 7
F05.08 Inspection run speed 0.000 - 0.630m/s 0.200m/s 0.001m/s
○
F05.09 Emergency run speed 0.000m/s - F00.02 0.100m/s 0.001m/s
○
F05.12 FDT1 0.0 - 100.0% (F00.02) 90.0% 0.1% ○