44
Presettingservos
ANLAGENBAU
EN
Presetting servos via configuration variables (CV)
Theservosarepresetbymeansofconfigurationvariables(CV)viaadig-
italcontrolunitthatcanhandletheDCCdataformat.Ondoingso,youare
abletopresetbothholdpositionsofthefirstaddressandthemotionrates
oftheservoaswellastherockingfunction.
Viaasecondaddressyouarealsoabletopresettwoadditionalholdposi-
tionsindependentlyofeachother.Youwillthusbeabletoplaceforinstance
swivelwaterspoutsinfourdifferentholdpositions.
NOTICE
Property damage will result from wrong settings or wrong programming.
TheServoControlandtheservosmightnolongerfunctionproperlyor
bedestroyed.
X
OnlyprogramifyouhaveaworkingknowledgeofprogrammingCVs.
X
Readthroughandfollowthedirectionsgivenintheinstructionman-
ualofthedigitalcontrolunit.
Prerequisite conditions:
TheServoControlisconnectedtothesupplyvoltage.
TheServoControlisconnectedtoaprogrammingtrackportofadigital
controlunitthatcanhandletheDCCdataformat.
AservoisconnectedtotheServoControl.
ADVICE:
Pleaserefertotheoperatinginstructionsofthedigitalcontrolunit
tofindhowtoprogramthatdigitalcontrolunit.
X
Onthedigitalcontrolunitselectthefunctionbymeansofwhichyou
canpresetconfigurationvariables.
X
Presettherelevantconfigurationvariablesonthedigitalcontrolunit.
Tothisend,usethetable„Synopsisofallconfigurationvariables“on
page46aswellasparagraph„Example:Presettingtherockingfunc-
tion“onpage45.
X
TransferthepresetvaluestotheServoControl.
Thepresettingsaresaved.
