- 6 -- 6
05. Programming Optional Features
Follow the steps as below to program the option features:
- Start with the system disarmed
- Turn the ignition on and then off
- Within 10 seconds press the valet switch 3 times
- The siren will sound for 2 seconds to confirm the system has entered the programming mode
- Within 10 seconds press button #1 the same number of times as the number of the feature you wish to program.
The siren will chirp once for each press of button #1.
- After selecting the programmed item, press button #2 once, the siren will chirp the same number of times as the
feature you selected to confirm your selection
- Press button #1, #2 or #3 to program the feature as desired, the siren will respond with 1, 2 or 3 chirps to
confirm the setting. Then turn the ignition on and the siren will sound for 2 seconds to confirm leaving
programming mode. (if you don’t turn the ignition on the system will leave the programming mode automatically
10 seconds later)
- Repeat the above steps from turning the ignition on and off to program the next feature
* The system will leave the programming mode automatically if no buttons are pressed within 10 seconds or if the
ignition is turned on.
Re: #26 PIN - Personal Identification Number
Follow the steps as below to program the item #26 PIN:
- Start with the system disarmed
- Turn the ignition on and then off
- Within 10seconds press the valet switch 3 times
- The siren will sound for 2 seconds to confirm the system has entered the programming mode
- Within 10 seconds press button #1 26 times and then press button #2 once, the siren will chirp 26 times to
confirm that item #26 has been selected
- After 2 seconds the LED will start to flash 10 times slowly
- Press button #1 after the LED has flashed the number of times you want to set the PIN to. E.g. If you want to
choose 6 as the personal code then press button #1 once after the LED has flashed 6 times. The LED will turn off
to confirm leaving the programming mode.
* Program the next feature from turning the ignition on and then off
* If button #1 is not pressed to choose the new PIN then the previous PIN will be still valid
