- 4 -- 4
Press button #2:
When the system is triggered with the siren sounding and hazard lights flashing, press button #2 once, the siren and
hazard lights will both stop and then:
- The siren will chirp 4 times
- The hazard lights will flash twice
- The doors will unlock (if connected)
- The LED will flash to indicate the triggered zone
- The system will enter disarmed mode
By override mode:
If the remote control doesn’t work properly then overriding the system will clear the trigger and disarm the system.
Trigger and the System Alarming
The system will respond as follows if the system is triggered under armed mode: (When the system is triggered, the
siren sounding cycle will be 30sec., 60sec. or 8 cycles of 30sec. depending on the setting of Option features #14)
Shock sensor 1
st
stage triggered:
Light impact will activate the 1
st
stage of the shock sensor and the siren will chip 3 times to warn. If Option Feature #2
is programmed as ‘FIRST’ then the shock sensors 1
st
stage will be bypassed after 3 consecutive triggers until the
system is disarmed and armed again.
Shock sensor 2
nd
stage triggered:
Heavy impact will activate the 2
nd
stage of the shock sensor. The siren will sound and the hazard lights will flash for
one cycle. If Option Feature #2 has been selected as ‘BOTH’ then the 1
st
and 2
nd
stage of the shock sensor will be
bypassed after each stage has been triggered 3 times continually until the system is disarmed and armed again.
Bonnet opened and then closed:
The siren will sound and the hazard lights will flash for one cycle.
Bonnet opened and not closed:
The siren will sound and the hazard lights will flash for 3 cycles and the bonnet switch will be bypassed until it is closed.
Door opened and then closed:
The siren will sound and the hazard lights will flash for one cycle.
Door opened and not closed:
The siren will sound and the hazard lights will flash for 3 cycles and then the door input will be bypassed until all doors
are closed.
Ignition Acc. turns on and then off:
The siren will sound and hazard lights will flash for one cycle.
Ignition Acc. turns on and not off:
The siren will sound and the hazard lights will flash for 3 cycles and then the Ignition Acc. will be bypassed until it is
turned off again.
Panic Mode
With the system armed:
Press button #1 for 3 seconds and the siren will sound and hazard lights flash for one cycle. The system will remain
armed.
With the system disarmed:
Press button #1 for 3 seconds and the system will arm and then the siren will sound and the hazard lights will flash for
one cycle. The system will remain armed.
*During the panic mode, pressing button #1(#2) will
interrupt the panic mode and arm (disarm) the system.
