•
This appliance may be discoloured due to testing.
•
These instructions are only valid if the country code appears on the appliance. If
the code does not appear on the appliance, refer to the technical instructions for
adapting the appliance to the conditions for use in that country.
•
Installation must meet national or local regulations. Attention must be paid to:
safety (installation & use) regulations, health and safety at work act, local and
national building regulations, fire precautions act.
•
To prevent shocks, this appliance must be earthed.
•
This appliance has been UKCA/CE marked based on compliance with the relevant
Electrical and Electromagnetic Compatibility (EMC) Regulations/Directives for the
voltages stated on the data plate.
•
This equipment is for professional use only and must be used by qualified
persons.
•
The installer must instruct the responsible person(s) of the correct operation and
maintenance of the appliance.
•
Unless otherwise stated, parts which have been protected by the manufacturer
must not be adjusted by the installer.
•
Check that no damage has occurred to the appliance or supply cord during transit.
If damage has occurred, do not use this appliance.
•
Ensure the supply cord is routed free from the appliance to avoid damage.
•
We recommend supplementary electrical protection with the use of a residual
current device (RCD).
PREVENTATIVE MAINTENANCE CONTRACT
To obtain maximum performance from this unit regular servicing of the appliance should be
undertaken to ensure correct operation, it is functioning as intended, and safe to use. We recommend
servicing in accordance with SFG20 Maintenance Schedules and as a minimum, after 2,500 hours of
use, or annually, whichever comes
first and
that a maintenance contract be arranged with an
appointed service contact. Visits may then be made at agreed intervals to carry out adjustments and
repairs.