10
6.3 ELECTRIC SUPPLY & CONNECTION
The location of the electrical inlet is on the front of the appliance this unit is suitable for AC
supplies only. The standard terminal arrangement is Single phase (230V~) for all variants.
Live
Brown
Neutral
Blue
Earth
Yellow/Green
The appliance is fitted with a fused plug and only requires connection to a suitable 13 Amp
socket outlet. This model is rated 230V A.C. supply Ensure that the electricity supply is as
stated on the model’s data plate.
Before and after each use, it is good practice to inspect your appliance for any signs of
physical damage
– should you find anything, please report this to the appropriate onsite
person who will then take the necessary action.
As a minimum, we would also advise that the appliance cable & plug are inspected daily.
Check for damage to the plug housing, pins and the mains cable is secured to plug with no
wires showing.
When checking the plug and cable the wall socket should also be inspected for damage,
discoloration or cracks. If there is any damage to the plug, mains cable or socket the
appliance MUST NOT be used and it should be reported immediately to the maintenance
team/ responsible person, who should then notify the Technical Care Team.
Never plug two supplies into an adaptor, extension lead or a standard 13A double socket.
Do not plug any other appliance along with this appliance into a double socket.
Only use Falcon approved spare parts, including 13A plug.
THIS APPLIANCE MUST BE EARTHED
6.4 COMMISSIONING
Refer to section 2.0 for operation. Carry out the following operation:
6.4.1 Turn on mains power supply on.
6.4.2 Ensure green neon illuminates.
6.4.3 Turn temperature control knob to max.
6.4.4 Let the appliance heat up.
6.4.5 Switch appliance off.
