Specifications and descriptions in this document
are subject to change without notice.
© Protocol Insight, LLC 2017, 2018
Revision 1.2, February 22, 2018
P a g e
|
3
Step 2: Connect Thunderbolt 3 and Power
The Thunderbolt 3 connectors, which are USB Type-C connectors, do not support USB3.0.
Step 3: Capture an analyzer trace
1.
Launch the Falcon software.
2.
Select Analyzer mode.
3.
Configure the Simple or Advanced Trigger from the Tools menu if desired.
4.
Press Analyzer Connect then Start and capture the trace.
Step 4: Configure and run Trace Validation tests
1.
Go to the TV Configuration window.
2.
Select which Trace Validation Tests to run.
3.
Press the Start button and watch the TV Results windows fill with Pass, Fail, Warning, or Info
results.
